7mm mandrel slotCAVITIES:14x9, 15x10, 16x11
This is the same as BR-208 Crosshatch Texture BR-208 Crosshatch Texture, except the base bead cavity is 11mm instead of 15mmThis is not a flat texture tool. The concave trough adds a crosshatch texture to the curve of a donut bead. Click on the picture to see the 'more info' page for bead pictures.This tool has one 11mm big-hole-bead cavity. BR-205 has an additional 8 bead size options.Video of how to use this tool and it's companion tool BR-2057mm mandrel slotCavity: 11x8mmTexture trough: 8mm wide
Velvet ring pouch with snap attachment(does not include the snap to be attached)Pouch: 2-1/2" x 3-1/2"Interior: 2" x 2-1/2"
Velvet pouch with snap attachment(does not include the snap to be attached)Pouch: 2-1/2" x 3-1/2"
Tungsten pick, swivel head pin vise
Six .04" mandrels, 7" tungston
How it works: Each row corresponds with a cavity on the tool, ie: the top row of red counters are for the top cavity on the tool. When you make a bead, move the corresponding bead on the abacus. No more burning your face to peek in the kiln to see what you've made.
Has a minor chip on the outside of a mandrel slot, does not effect the function of the tool.CAVITY SIZES (mm):3/4” 7/8” 15/16” 1”
Powered by ShopSite Shopping Cart Software